1.0 OBJECTIVETo lay down the procedure for cleaning of microscope & its accessories.
2.0 SCOPEThis procedure is applicable to clean the microscope, installed in QC department.
3.0 RESPONSIBILITY3.1 Doing : Technical Assistant
3.2 Checking : Executive /Manager
4.0 ACCOUNTABILITYHead of the Department
5.0 PROCEDURE5.1 Before operating the microscope clean optical surface with lint – free cloth.
5.2 Clean the lenses with tissue papers or a cotton swab moistened with methanol.
Note: Care should be taken that only required methanol should be used, it should not much in quantity that it remain on lenses which damage the interior surface by loosening cement of it.
5.3 Clean the magnification objectives with a cloth or tissue paper, wrapped around finger & moistened with methanol.
5.4 Clean the surface of small concave front lens with a toothpick covered with cotton tip or with a small cotton swab, moistened with methanol.
5.5 Maintain the cleaning records in log book.
5.6 Frequency : Before and after use.
Ankur Choudhary is India's first professional pharmaceutical blogger, author and founder of Pharmaceutical Guidelines, a widely-read pharmaceutical blog since 2008. Sign-up for the free email updates for your daily dose of pharmaceutical tips.
.moc.enilediugamrahp@ofni :liamE Need Help: Ask Question
Spread the Knowledge ⇩⇩⇩