SOP for Cleaning of Barrel Pump and Pipe

1.0 OBJECTIVE

To lay down a procedure for cleaning of barrel pump & pipe.

2.0 SCOPE

This SOP shall be applicable for cleaning of barrel pump and pipe at Stores Department.

3.0 RESPONSIBILITY

Stores Assistant

4.0 ACCOUNTABILITY

Head of Department

5.0 PROCEDURE

5.1 Store person shall remove the barrel pump along with attached pipe from the drum and transfer it in a covered polythene bags to the washing area.
5.2 Fill the bucket with D.M water (approx. 20 Lts.) and put the dispensing barrel pump and pipe for washing.
5.3 Store person shall operate the barrel pump in the bucket containing D.M water.
5.4 Wipe the barrel pump and pipe externally with the clean cloth damped with D.M water.
5.5 Wipe the barrel pump and pipe externally with dry lint free cloth and allow drying for 15 minutes.
5.6 Place the cleaned pump in a polythene bag and affix the “Cleaned” label on it and transfer into the dedicated area.

6.0 ABBERIVATIONS

6.1 SOP – Standard Operating Procedure
6.2 D.M. – De-Mineralized

Get editable documentsView List