Ultrasonic Bath

PROCEDURE

• Place the ultrasonic bath on a leveled surface.
• Ensure that all the connections of the instrument are proper.
• Ensure that water level is adequate.
• Ensure that filled water is clear.
• Switch ‘ON’ the mains.
• Switch ‘ON’ the ‘ULTRASONIC’ bath button.
• Set the timer in a clockwise direction.

HEATER

If the method of analysis requires simultaneous heating also, then only switch ‘ON’ the ‘HEATER’.

PRECAUTIONS

Never turn the timer in the anticlockwise direction.
Note: Change the water in the ultrasonic bath once a week or early if required.

REFERENCE

Operating instructions manual of ultrasonic cleaning bath.