SOP for Entry and Exit into Quality Control Laboratory

1.0 OBJECTIVE

To define the lay down the procedure for entry/exit procedure of quality control laboratory.

2.0 SCOPE

This procedure is applicable for entry/exit procedure of quality control laboratory.

3.0 RESPONSIBILITY

Executive/Officer - Quality Control

4.0 ACCOUNTABILITY

Manager - Quality Control

5.0 PROCEDURE

5.1 Entry Procedure

5.1.1 Enter in the change room.
5.1.2 Put off the street shoe, keep them in the shoe rack.
5.1.3 Cross over the bench.
5.1.4 Put on slippers provided in the change room.
5.1.5 Use dedicated slippers only provided in the change room for going into the quality control laboratory.
5.1.6 Collect the clean linen/ Laboratory dress from the safe of the change room.
5.1.7 Put on Laboratory dress white apron and white cap in the change room.
5.1.8 Enter into the lab after wearing the Laboratory dress.
5.1.9 Disposable shoe cover and caps may be provided to visitors at the time of visit in the laboratory.
5.1.10 Photographs for Entry procedure in Quality Control Lab should be enclosed.
Related: SOP for Entry and Exit in Microbiological Testing Room

5.2 Exit Procedure

5.2.1 Enter into the change room before leaving the respective department.
5.2.2 Put off laboratory dress (apron and cap) and put on the hanger provided. If the dress is not dirty.
5.2.3 Put the dress in linen bin if the dress is dirty.
5.2.4 Send all dirty dresses for washing every day
5.2.5 Remove slippers and keep it at the dedicated place.
5.2.6 Cross over the bench.
5.2.7 Put on the street shoe and exit from the change room.
5.2.8 Photographs for Exit procedure in Quality Control Lab should be enclosed.

6.0 ABBREVIATIONS

6.1 SOP - Standard Operating Procedure

Get editable documentsView List