SOP for Milli-Q Water System from Milipore

1.0 OBJECTIVE

To describe a procedure for operation of Milli-Q water system from Millipore.

2.0 SCOPE

This SOP is applicable for operation of Milli-Q water system from Millipore.

3.0 RESPONSIBILITY

Officer/ Executive - Quality Control

4.0 ACCOUNTABILITY

Manager - Quality Control

5.0 PROCEDURE

5.1 Operating Procedure

5.1.1 Ensure the area is clear.
5.1.2 Ensure that water supply is continuing.
5.1.3 Pressure gauge shows the water circulation.
5.1.4 Pressure should be more than 1.5 kg /cm2.
5.1.5 Instrument has three parts.
A. Millipore Elix
B. Millipore Reservoir
C. Millipore Milli-Q
5.1.6 Put on the main switch connected to the system.
5.1.7 Light glows to indicate the power supply to the instrument.
5.1.8 Press operates / stands by mode, displays “pre operate” in Elix.
5.1.9 Water treated in Elix System collect automatically in “reservoir”.
5.1.10 Water again to filter through Milli-Q system.
5.1.11 Press operates / stands by mode, displays “pre operate” in Milli-Q.
5.1.12 Collect Milli-Q water through the outlet.
5.1.13 Press the key stand by display shows “Standby”.
5.1.14 Never put off the power supply to the instrument.
Related: SOP for Cleaning of Water Purification System

6.0 ABBREVIATIONS

6.1 SOP - Standard Operating Procedure
6.2 kg - Kilogram

Get editable documentsView List