SOP for Sonicator

1.0 OBJECTIVE

To describe the procedure for operation and calibration of Sonicator.

2.0 SCOPE

This SOP is applicable for operation and calibration of Sonicator.

3.0 RESPONSIBILITY

Officer/ Executive - Quality Control

4.0 ACCOUNTABILITY

Manager - Quality Control

5.0 PROCEDURE

5.1 Operation

5.1.1 Ensure that the area and instrument are clean.
5.1.2 Fill the purified water in both on the optimum level.
5.1.3 Switch “ON” the main power supply and press “POWER” button to “ON”.
5.1.4 Slowly keep the lower tray into the bath.
5.1.5 Select the SONIC by MODE button and control the strength of sonic.
5.1.6 Select “TIME” by “MODE” button and set the operating time by “UP/DOWN” button.
5.1.7 Select “TEMP” by “MODE” button and set the temperature by “UP/DOWN” button.
5.1.8 After feeding all parameter, push the “START/STOP” button to start cleaning.
5.1.9 When the items are removed from the sonicator, press “START/STOP” button and “POWER” button.

6.0 ABBREVIATIONS

6.1 SOP - Standard Operating Procedure

Get editable documentsView List