SOP for Cleaning of Photoflurometer

1.0 OBJECTIVE

To clearly lay down the procedure for cleaning.

2.0 SCOPE

This procedure is applicable to photoflurometer installed in quality control laboratory.

3.0 RESPONSIBILITY

3.1 Doing: Technical Assistant /Executive
3.2 Checking: Executive/Manager

4.0 ACCOUNTABILITY

Head of the Department

5.0 PROCEDURE

5.1 After completion of the testing, switch off the instrument.
5.2 Switch off the mains.
5.3 Remove the filter from the instrument and keep it in the filter box in the dedicated drawer.
5.4 Remove the tube from the sample compartment and clean with a solvent in which solution of the sample is prepared. Air dry and keep it in the same drawer.
5.5 Clean the outer surface of the instrument with Isopropyl alcohol and dry it with tissue paper. Record in the format of instrument log card.

6.0 ABBREVIATION

6.1 SOP - Standard Operating Procedure

Get editable documentsView List