SOP for Cleaning of Ultrasonic Bath

1.0 OBJECTIVE

To clearly lay down the procedure for cleaning.

2.0 SCOPE

This procedure is applicable for ultrasonic bath, installed at quality control laboratory.

3.0 RESPONSIBILITY

3.1 Doing : Technical Assistant
3.2 Checking : Executive/Manager

4.0 ACCOUNTABILITY

Head of the Department

5.0 PROCEDURE

Frequency: Once in a week
5.1 Switch ‘OFF’ the Mains.
5.2 Remove the lid from the ultrasonic bath.
5.3 Wash the lid with purified water properly .
5.4 Remove the water from the ultrasonic bath and wash the ultrasonic bath with purified water properly and mop with a clean dry cotton cloth.
5.4 Fill purified water up to 3/4 th height of the bath.
5.6 Put the lid of the bath.
5.7 After completion of cleaning, record in the format.
Note: In between when water becomes dirty follow the same from 5.1 to 5.7

6.0 ABBREVIATION

6.1 SOP - Standard Operating Procedure

Get editable documentsView List