SOP for Gowning Procedure for Visitors in Quality Control

1.0 OBJECTIVE

To lay down a gowning procedure for the visitors.

2.0 SCOPE

This procedure is applicable to visitors (i.e auditors, inspectors etc.) and employee escorting the visitors.

3.0 RESPONSIBILITY

3.1 Doing: Visitors
3.2 Checking: Executive/ Assistant Manager

4.0 ACCOUNTABILITY

Head of the Q.C Department

5.0 PROCEDURE

5.1 Gowning Procedure:

5.1.1 Enter into the front entrance of the Quality Control Laboratory.
5.1.2 Take the shoe cover & wear on shoes before entering into the main corridor of Quality Control Laboratory.
5.1.3 Take clean apron and wear it over personal attire.
5.1.4 Open the door and move into the main corridor of the Quality Control Laboratory.
5.1.5 The visitors, i.e Auditors, Inspectors are accompanied by the Plant Head or any other responsible person as the case may be.

Related: SOP for Entry and Exit into Quality Control Laboratory

5.2 De- gowning Procedure:

5.2.1 Enter into the front entry from the main corridor of the Q. C Laboratory.
5.2.2 Remove the apron & discard in the bin provided.
5.2.3 Remove the shoe cover and discard in the bin provided.
5.2.4 Open the door and move out of the Q.C.Laboratory.

6.0 ABBREVIATIONS

Q.C. = Quality Control

Get editable documentsView List