Nov 19, 2026

Electronic Batch Record Validation for GMP Compliance

Learn electronic batch record validation, including risk assessment, audit trails, electronic signatures, data integrity and GMP controls.
Utilization of Electronic Batch Records (EBRs) in pharmaceutical production involves the development, application, verification and storage of the electronic batch record. Moreover, Electronic Batch Record Validation refers to the actions documented in order to demonstrate that the EBR system performs its appropriate tasks, provides reliable and accurate batch records and complies with regulations regarding Good Manufacturing Practices.
Electronic Batch Record Validation
An EBR system is capable of regulating instructions for manufacturing, distribution of ingredients, equipment working condition, parameters of production process, assessment during production process, actions of the operator, deviations from production processes and process of batch assessment. Some of the available EBR systems can be integrated with other company’s management systems, such as Manufacturing Execution System (MES), Enterprise Resource Management (ERP), weighing system and other technological devices.

Demonstration of validation would mean proving that the entire electronic system functions well in real environment of manufacturing. Hence, even installation of a certain software or performance by its producer wouldn't be able to convince anybody of the reliability of the electronic batch record.

Begin with the Manufacturing Process, Not the Software

The organization should acquire an understanding of how electronic batch records will control and record the manufacturing process before any panel preparation of validation protocol.

Initially, a thorough review of current manufacturing procedures should take place, including identification of paper procedures that will now be transformed into electronic procedures such as master batch records, SOP, equipment needs, materials control, in-process checks and QA checks.

The scope should cover:
  • Products, manufacturing processes and areas of production involved in the system.
  • Master batch records and electronic instruction.
  • Processes of materials dispensing and accounting for usage.
  • Equipment and tool interfacing requirements.
  • Operator, supervisor and QA approval processes.
  • Electronic records, signatures and audits of the process.
  • Interfacing the system with ERP, MES, process control systems, etc.
It is commonplace to rely on the functionalities of the EBR software without knowing about the manufacturing processes regulated by these functions. For instance, while the system may display a right mixing instruction, it would not be able to stop the operator from proceeding when the equipment status required for that instruction has not been confirmed.

This means that the validation scope must cover the entire workflow, along with the relevant interfaces and manual work outside the EBR system.

URS and Risk Assessment: Define the Controls

1. Preparing the User Requirements Specification

The User Requirements Specification defines how EBR should support the approved manufacturing process. In this document, requirements must be specific, quantifiable and verifiable. These can include, for instance, the following:
  • The system must identify the product, its batch number and its master record revision.
  • Only authorized personnel will be able to create or change records related to master batches.
  • Dispensing must be confirmed according to approved codes and quantities of materials.
  • All parameters of critical processes must be noted and include proper units of measurement and acceptance limits.
  • Necessary steps should be complete before the subsequent steps start happening.
  • All deviations are required to be documented and forwarded.
  • Electronic signatures must indicate who signed them and what the approval means for the document.
  • The modification of electronic documents is ensured through audit trails.
The URS also covers the system's availability, requirements for data storage, backup, security and reports.

2. Using Quality Risk Management

Risk assessment indicates functions requiring the highest level of validation effort. Several factors need to be taken into consideration in terms of their potential effect on the product quality, patients’ safety, data integrity and disposition of batches.

For instance, if a batch header is displayed incorrectly, it might create a problem with documentations. In another situation, an error in calculating the quantity of materials could influence the batch composition. The same concerns unauthorized access changes in the critical processing parameter in the system.

The outcomes of risk assessments should be recorded and utilized in the approach to validation testing. Functions that are critical should not only undergo standard testing procedures, but should also be subjected to proper testing and controlled challenges.

Validation of the EBR System

The aim of the validation process is to show that the infrastructure, application program, configuration, interfaces and manufacturing workflow are functioning properly. There should be specific definitions of qualifications according to the Computerized system validation of the site.

1. Installation Qualification (IQ)

IQ confirms that the system was installed according to the previously approved specifications. This may include but may not be limited to the following items, depending on the system architecture of the computerized system: all servers, workplaces, versions of the software being used, databases, network elements and related infrastructure and so on.

The documentation of the installation, details of system configuration, manufacturer documentation should be available.

2. Operational Qualification (OQ)

The OQ verifies the system functions regarding the approved expectations. The testing should include both normal and abnormal operating conditions.

Key examples of tests include:
  • User logon/authorization and access rights.
  • The master batch record generation, revision and approval.
  • Material selection and dispensing calculation.
  • The limits of parameters and mandatory operation controls.
  • Electronic signature and approvals.
  • Audit trail writing and reviewing.
  • Error messages, wrong input and process restrictions.
  • Sending and receiving of information between integrable appliances.
Negative testing is very important. For instance, if the dispensing value is outside the accepted margins, it is needed to check how the system essentially deals with the unauthorized action or follows the expected process workflow.

3. Performance Qualification (PQ) and User Acceptance Testing

The goal of PQ (user acceptance testing) is to verify that the configured EBR (Electronic Batch Record) system is capable of performing the actual manufacturing processes in a realistic scenario.

In practice, a batch simulation can be done using a certified testing environment and the appropriate test data. The study should include:
  • material dispensing
  • production instructions
  • equipment verification
  • process parameters recording
  • in-line verification
  • approval by the operator
  • exception handling
  • completion of the batch records
The people who participate in the testing should be representatives from the departments of production, QA, engineering, IT, etc. The evidence provided in the end should prove that the system can manage the process in question rather than just demonstrate the working of each separate screen in the software.

Functions of EBR That Are Filled with Testing

1. Master Batch Record and Recipe Control

Master Batch Record is the core of EBR. The validation must make sure if the approval of statements, formulations, quantity of materials, conditions of processes and control of revision are done properly.

A major test is to ensure the technician will not be able to run any obsolete master record. Any modifications must go through an agreed change control with required reviews and approvals.

2. Material Dispensing and Reconciliation

Material dispensing is one of the crucial EBR functions. The identity, batch, target quantity, acceptable tolerance, real quantity and logic of reconciliation must be tested.

These parameters (e.g. ingredients with necessary input measures and authorized amount of dispersion) should be properly checked.

During vulnerability, the validation must test the mechanism of bar code scanning, the interfaces between scales, conversion and determination of quantities.

3. Equipment Interfaces and Process Parameters

These systems could get process information from weighing systems, PLCs, SCADA systems and/or any other apparatus. Validation should ensure that the required data are received and placed in the required batch and time stamps, as well as in relevant units.

Test some vital parameters/criteria such as mixing time, temperature, pressure, speed, or some other specific ones. Check how the unavailability of such data is managed, if such data is missing, invalid, late, or has values outside the established ranges.

The interface that allows an incorrect value to be transferred without any warning undermines the reliability of a batch record.

Data Integrity, Audit Trails and Electronic Signatures

A complete, accurate, attributable and retrievable electronic batch record is required for its lifecycle.

Access controls must ensure that users are able to perform the necessary actions in accordance with their assigned roles. Shared accounts must be eliminated where accountability of the individual is essential.

Audit trail testing will ensure that events concerning creation, modification, deletion and approval are recorded with correct user identification information, time and date of the event and information on what changes were done. Audit trails should not be available for changes unless otherwise specified in the procedures.

Perform testing to ensure that electronic signatures are unique and attributable, connected to the specific record and related to the proper intent such as execution, verification or approval.

Ensure that backup and restoration testing demonstrates recovery of electronic batch records without affecting the completeness or usability of the record. Ensure that you can retrieve the record for the full record retention period with the retention and archival options.

If applicable (based on US FDA requirements) determine the applicability of 21 CFR Part 11 based on the type of electronic records and signatures being used. Remember that the underlying GMP record requirements are still important even with limited Part 11 applicability.

Handling Deviations, Modifications and System Launch

It is necessary to document and analyze every failed test and unforeseen behavior of the system. The review needs to determine whether the problem is connected to the configuration of the product, misinterpretation of the requirement, incorrect mapping, errors in executing tests, or a basic issue appearing in the process of production.

For instance, in case the EBR produces an incorrect amount of a product, the review must analyze how the master formula, logic used for calculations, units of measurement, rounding rules and configuration affect this issue. Moreover, the review must evaluate whether there were any previously produced products, which might have been influenced by the current issue.

All necessary corrections must be done with the help of regulated changes and the process must be followed by the retesting of the new system. Regression testing must be conducted to make sure no problems occurred due to changes that were done.

Before final release of product, the QA department should ensure that all necessary validation documentation has been submitted, any discrepancies have been dealt with, users have undergone training, processes have been in practice and that the system is ready for it’s intended use.

Once the product is live, the system is maintained in a validated state through periodic reviews, management of incidents, reviews of access, vendor management and changes control procedures.

What Inspectors May Examine

During GMP inspections, the inspector may choose a particular electronic batch record and inquire about the functions of the system used to protect against unauthenticated changes, ensure proper approval of material use and changes to master records, as well as perform operator monitoring.

The organization should be ready to provide:
  • Validation plans and reports.
  • Traceability from URS to testing procedures.
  • Verification of proper operation and functionality of critical operations.
  • Audit records.
  • Controls for electronic signatures.
  • Details of changes made to master batch records.
  • Data about backup, recovery and recording operations.
  • Methods for dealing with deviations, system incidents and changes.
An extremely critical item that is checked is whether the electronic batch record can provide the comprehensive history of the production process. It is essential to stress the fact that just a printed summary that does not have the required electronic content (audit trail data, information about exceptions) will not cover the requirements necessary for the complete electronic record.

Revalidation of Electronic Batch Records should ensure proper functioning of all the elements involved in manufacturing such as instructions, materials, processes, approvals and records. The best validation method is the one that tests actual manufacturing processes including occurrences of exceptions and interacting system, instead of restricting oneself to functionality of the software. Quality Assurance department should allow the use of the system in production only when proper evidences confirm that the system works in accordance with expectations and manages to control its operations after implementation.

Get editable documentsView List

No comments:

Post a Comment

Please don't spam. Comments having links would not be published.