SOP for Cleaning of Lighting and Fixtures

1.0 OBJECTIVE

To lay down the procedure for cleaning of Lighting and Fixtures.

2.0 SCOPE

This SOP shall be applicable for cleaning of lighting fixtures of General corridors, Production, Dispensing, Sampling and Quality Control areas.

3.0 RESPONSIBILITY

Technician/Operator

4.0 ACCOUNTABILITY

Head of all departments

5.0 PROCEDURE

5.1 Ensure that the equipment and products are covered properly.
5.2 Place a ladder in proper position.
5.3 Switch OFF the power supply of lighting fixture.
5.4 Use a lint-free cloth to clean the fixture.
5.5 Remove the acrylic cover and wipe it thoroughly.
5.6 Clean the reflectors and fixtures internally.
5.7 Fix back the acrylic cover in position.
5.8 Ensure that all the screws are in position and no gaps are seen.
5.9 Switch ON the power supply and check the functioning of the lights.
5.10 Enter the details in lighting fixtures cleaning record.
5.11 Place the ladder back to an appropriate location.
5.12 Ensure that the work area is clean after work is completed.
5.13 Frequency for cleaning of lighting fixtures of production, sampling and dispensing areas shall be once in three months.
5.14 Frequency for cleaning of lighting fixtures of Quality Control area and general corridors shall be once in six months.
Related: SOP for Operation of the Lux Meter and Monitoring the Lux Level

6.0 ABBREVIATION

6.1 SOP: Standard Operating Procedure

Get editable documentsView List