SOP for Cleaning of Water Bath

1.0 OBJECTIVE

To clearly lay down the procedure for cleaning.

2.0 SCOPE

This procedure is applicable for water bath of installed, at quality control laboratory.

3.0 RESPONSIBILITY

3.1 Doing: Technical Assistant
3.2 Checking: Executive/Manager

4.0 ACCOUNTABILITY

Head of the Department

5.0 PROCEDURE

Frequency: Once in a week
5.1 Switch ‘OFF’ the Mains.
5.2 Remove the lid from the water bath.
5.3 Wash the lid properly with purified water.
5.4 Remove the water from the water bath and wash the water bath with purified water and mop with a clean dry cotton cloth.
5.5 Fill purified water up to 3/4 th height of the bath.
5.6 Put the lid of the bath.
5.7 After completion of cleaning of the water bath, record in the format.
Note: In between when water becomes dirty follow the same from 5.1 to 5.7
6.0 ABBREVIATIONS
6.1 SOP - Standard Operating Procedure

Get editable documentsView List