Forced degradation is also known as stress testing and a drug is degraded forcefully by applying artificial methods. It is a useful tool to predict the stability of any Active Pharmaceutical Ingredient (API) or formulation product. It helps to know about the impurities developed during the storage of drug products in various environmental conditions.
Forced degradation study depends upon the product and the type of dosage form. Solid, liquid and injection dosage forms have different procedures of the stress study. ICH Q1B guideline provides guidance only on the photostability of the product.
According to the FDA forced degradation study is performed during the third phase of the regulatory submission of the drug substance or drug formulation product. Limit of degradation is 5-20%. More than 20% degradation is abnormal and should be investigated.
Related: Mean Kinetic Temperature (MKT) in Stability Studies
The forced degradation study should have acid and base hydrolysis, photolysis, thermal degradation and oxidation. Any regulatory guideline does not mention the pH conditions for acid and base hydrolysis, the temperature for thermal degradation or mane or concentration of an oxidizing agent.
A big question arises here about the concentration of the drug that is being tested for the degradation. 1 mg/ml of drug concentration is recommended for the degradation study but some degradation studies are done at the concentration of the drug in the final product. The reason behind this is the degradation at higher concentration become more than the lower concentration and exact amount of the degradation can be found in the final product and their impact can be monitored.
Related: Guidelines for Stability Studies
The compounds that are not freely soluble in water are mixed with other solvents to make them dissolve in HCl or NaOH. These solvents selected to dissolve the drug should not degrade it. Chemical degradation should be carried out at room temperature but when there is no degradation found at room temperature it should be done at 50-60 ⁰C.
It should be carried out for not more than 7 days. Chemical degradation should be terminated using suitable acid, base or buffer solution to stop further degradation. The analysis should be done as soon as possible after the termination of the test.
2. Oxidation Degradation: H2O2 (Hydrogen peroxide) is a widely used oxidizing agent and also used in the forced degradation study. A 0.1% to 3.0% solution of hydrogen peroxide is applied at room temperature for 7 days. More than 20% degradation is considered abnormal.
Also see: Impurity Profiling of Drug Substances in Pharmaceuticals
4. Thermal Degradation: Temperature affects the stability of the drug substance more than the other conditions. Therefore it more important factor and should be done carefully. Thermal degradation study is done at 40-80⁰C.
Forced degradation study depends upon the product and the type of dosage form. Solid, liquid and injection dosage forms have different procedures of the stress study. ICH Q1B guideline provides guidance only on the photostability of the product.According to the FDA forced degradation study is performed during the third phase of the regulatory submission of the drug substance or drug formulation product. Limit of degradation is 5-20%. More than 20% degradation is abnormal and should be investigated.
Related: Mean Kinetic Temperature (MKT) in Stability Studies
The forced degradation study should have acid and base hydrolysis, photolysis, thermal degradation and oxidation. Any regulatory guideline does not mention the pH conditions for acid and base hydrolysis, the temperature for thermal degradation or mane or concentration of an oxidizing agent.
A big question arises here about the concentration of the drug that is being tested for the degradation. 1 mg/ml of drug concentration is recommended for the degradation study but some degradation studies are done at the concentration of the drug in the final product. The reason behind this is the degradation at higher concentration become more than the lower concentration and exact amount of the degradation can be found in the final product and their impact can be monitored.
Related: Guidelines for Stability Studies
Conditions for Forced Degradation Studies:
1. Hydrolytic Degradation: Hydrolysis is a common degradation process by the reaction of chemical with water at different pH values. In forced degradation, the drug reacted with the water at acidic and basic conditions. The concentration of the acid or base is selected according to the stability of the drug substance. Generally, 0.1 to 1.0 M HCl or H2SO4 (Hydrochloric acid or Sulfuric acid) is used to create the acidic conditions and 0.1 to 1.0 M NaOH or KOH (Sodium hydroxide or Potassium hydroxide) is used for basic conditions.The compounds that are not freely soluble in water are mixed with other solvents to make them dissolve in HCl or NaOH. These solvents selected to dissolve the drug should not degrade it. Chemical degradation should be carried out at room temperature but when there is no degradation found at room temperature it should be done at 50-60 ⁰C.
It should be carried out for not more than 7 days. Chemical degradation should be terminated using suitable acid, base or buffer solution to stop further degradation. The analysis should be done as soon as possible after the termination of the test.
2. Oxidation Degradation: H2O2 (Hydrogen peroxide) is a widely used oxidizing agent and also used in the forced degradation study. A 0.1% to 3.0% solution of hydrogen peroxide is applied at room temperature for 7 days. More than 20% degradation is considered abnormal.
Also see: Impurity Profiling of Drug Substances in Pharmaceuticals
4. Thermal Degradation: Temperature affects the stability of the drug substance more than the other conditions. Therefore it more important factor and should be done carefully. Thermal degradation study is done at 40-80⁰C.
if degradation not happens in any condition,we can accept that method or not?
ReplyDeleteYes why not?
Deletewhy do we perform acid and alkali stress???????
ReplyDeleteHow can we confirm that the sample solution is degraded or not specially on hplc
ReplyDeleteCompare with control sample,
ReplyDeletehow to perform degradation studies on uv instrument and were can we get exact procedure ?
ReplyDelete