SOP for Preparation, Review and Approval of Standard Operating Procedures : Pharmaguideline

Online GMP Courses with Certificate

ENROLL

SOP for Preparation, Review and Approval of Standard Operating Procedures

Standard operating procedure to prepare review and approve the Standard operating procedures.

1.0 Purpose:

To describe the procedure for Preparation, Review and Approval of Standard Operating Procedures.

2.0 Scope:

This procedure is applicable to all SOPs.

3.0 Responsibility:

Executive/Officer QA/ Designee: Preparation and Revision / Periodic review of SOPs.
QA Head / Designee: Review and Training of SOP.
Site Quality Head/GM-works/ Designee: Approval of SOP

4.0 Procedure (Preparation of Standard Operating Procedure):

4.1 All SOP’s shall be as per the SOP Format, attached as Annexure 1.
4.2 Each page including Annexure shall bear company logo.
4.3 All the SOPs shall consist of Header, Content and Footer Part.
4.3.1 The Header part of each SOP shall remain common for all pages excluding format & Annexure pages. The Header part of the SOP shall consist of the following:

4.3.1.1 Standard Operating Procedure:

STANDARD OPERATING PROCEDURE shall be printed in Times New Roman letters. Font Size: 14, Style: Bold, Capital.

4.3.1.2 Title:

The title of SOP shall be in Times New Roman letters. Font Size: 12, Style: Normal, Bold Sentences Case. It should be self-descriptive.

4.3.1.3 Copy No.:

The copy no. shall appear on all the pages of SOP except Master copy.

4.3.1.4 Block for Stamping Purpose:

This Space shall be used for putting the stamp for controlled documents on the photocopies.

4.3.1.5 Department:

The name of the department preparing the SOP shall be in Times New Roman letters. Font Size: 12, Style: Bold, Regular.

4.3.1.6 Page No:

The page number shall appear on the right-hand corner of the header. This specifies the page number, with respect to the total number of pages of the SOP, excluding the Annexure.

4.3.1.7 SOP No.:

Numbering of SOP:
SOP number shall consist of 16 characters.
  • First two characters, 'AB' denotes "ABC Limited ". 
  • Third character L denotes site code, (Refer Annexure 2) 
  • Fourth character denotes Slash (/). 
  • Fifth and sixth character denotes Department or Section code. eg. QA for Quality Assurance, PR for Production, WH for Warehouse. ( Refer Annexure 2 ) 
  • Seventh character denotes slash (/) 
  • Eight, ninth and tenth characters, denotes "SOP'' 
  • Eleventh, Twelfth & Thirteenth characters denote serial number of SOP, starting from "001" onwards.
  • Fourteenth character denotes dash (-). 
  • Last two characters denote Revision No of SOP. 
e.g. First new SOP of QA at the location shall have SOP number as ABL/QA/SOP001-00

4.3.1.8 Supersede:

In case of a new SOP, Supersede No. will be Nil. If Revision of SOP is done than the previous SOP No. will be written against Supersede.

4.3.1.9 Effective Date:

The effective date is the Date from which the SOP shall be effective. Training shall be given to all concerned personnel before the effective date of the SOP.

4.3.1.10 Review Date:

This is the Date, before which the SOP shall be reviewed. Every two years from the effective date, SOP shall be reviewed. In case any need arises, SOP shall be reviewed, before the defined review period through a change control procedure.
QA shall assign a review date, two years from the effective date.

4.3.1.11 Prepared by:

The person preparing the SOP from the initiating department shall sign with the date, in black ink. The designation shall be printed with Department, mentioned in Annexure-2

4.3.1.12 Reviewed by: 

Head of the initiating Department/Designee shall review the SOP and sign with date, in black ink. The designation shall be printed with Department, mentioned in Annexure-2

4.3.1.13 Approved by:

Site Quality Head and his designee shall approve all SOPs of Quality Assurance and Quality Control department. Site Quality Head and concerned Department Head shall approve all SOPs of other departments. They will sign with the date in blue ink.

4.4 Content Part:

4.4.1 All SOPs shall contain the following sections:
i) Purpose
ii) Scope
iii) Responsibility
iv) Procedure
v) Revision log
vi) Abbreviations
vii) Annexures

The details of the seven sections shall be as follows:

4.4.1.1 Purpose:

This section shall describe the justification for the preparation of the SOP and what is expected from it.

4.4.1.2 Scope:

This section shall indicate the applicability of the SOP for its intended use.

4.4.1.3 Responsibility:

This section shall indicate responsibilities of the personnel for the intended activity.

4.4.1.4 Procedure:

This section shall cover stepwise activities performed and conditions /precautions required for implementing the SOP.
  • SOP text shall be written in the simple and clear language in Font Style, "Times New Roman", with a Font size of ‘12’ and space between the lines shall be 1.5 lines. A4 size white paper shall be used for printing. 
  • Bold letters shall be used for Heading and/or Subheadings. 
  • All the signatures and date shall be in black ink except signature of approval. 
  • All SOP shall be written in the English language. 
  • Frequency: The frequency of operations shall be mentioned in the procedure if applicable. 
  • References: References shall be mentioned in the procedure if applicable. 

4.4.1.5 Revision Log:

Revision Log shall have following details:
Revision No.                       Effective Date                                  Reason 

4.4.1.6 Abbreviations:

The Abbreviations used in the SOP shall be described in this section.

4.4.1.7 Annexures:

  • Annexure shall be formatted, used for recording the data, related to the activity. 
  • Annexure shall have a unique format number linked to the relevant SOP Number and shall be written at the bottom, left of the page.
  • Copy of an Additional Format taken from other SOP’s shall be attached as Annexure, which has a linkage or bearing on the said SOP. The same shall be indicated in the list of Annexures.

4.5 Footer Part:

The format number used for preparing the SOP is mentioned in the footer block. The font size of the format no. shall be in Times New Roman Font Size:10, Style: Regular. The format numbering system shall be as follows:
Format number shall consist of total sixteen characters. This formatted number shall appear on all the SOPs.
  • First two characters 'AB' denote ABC Limited.
  • The third character ‘L’ denotes the manufacturing Site location. (Refer Annexure 2 )
  • Fourth character represent, "Slash" (/)
  • Fifth & sixth character denotes the name of the Department or Section. (Refer Annexure 2)
  • Seventh, eighth and ninth characters denote SOP number of respective department to which the format is linked.
  • Tenth character is "Slash" (/).
  • Eleventh character is 'F', which stands for the format.
  • Twelfth and thirteenth characters represent a sequential number to format, starting with '00' onwards.
  • Fourteenth character denotes dash (-)
  • Fifteenth and Sixteenth characters represent Revision Number of the format.
If a format is made for the first time it is indicated as “00” in the Revision No and subsequent revisions in the format shall be indicated by “01”, "02", and so, on.
e.g.: ABL/QA001/F01-00
“Quality Assurance”, 001 is the SOP number to which the format is linked, “F” represents the “Format”.
“01” represents the Format No. Followed by dash (-) and “00” indicates the revision number, i.e new format.
Related: SOP on SOP for Pharmaceuticals

5.0 Revision Log:

Revision No.                        Effective Date                                Reason

6.0 Abbreviations:

Abbreviation
Expanded Form
F
Format
SOP
Standard Operating Procedure
QA
Quality Assurance
QC
Quality Control

7.0 Annexure:

Annexure 1: SOP Format
Annexure 2: List of Codes for Site & Department

Annexure-1
SOP FORMAT
STANDARD OPERATING PROCEDURE
Title:
Copy No.:

Department:
Page No.:
SOP No.:
Supersede:
Effective Date:
Review Date:
Prepared By
Reviewed By
                  Approved By
Designation




Signature & Date





1.0 Purpose:
2.0 Scope:
3.0 Responsibility:
4.0 Procedure:
5.0 Revision Log:
6.0 Abbreviations:
7.0 Annexures:

Annexure-2
LIST OF CODES FOR SITE AND DEPARTMENT
Site Name
Code
ABC
L
Functions
Department Code
Quality Assurance
QA
Quality Control
Microbiology
Stability and Validation
QC
MB
SV
Production (General)
PR
Production (Tablet)
PT
Production (Liquid)
PL
Production (Capsule)
PC
Engineering
EN
Marketing
MK
Information Technology
IT
Purchase
PU
Production Planning & Inventory Control
PP
Human Resource Management
HR

Get ready to use editable documents in MS-Word FormatView List





Ankur Choudhary is India's first professional pharmaceutical blogger, author and founder of pharmaguideline.com, a widely-read pharmaceutical blog since 2008. Sign-up for the free email updates for your daily dose of pharmaceutical tips.
.moc.enilediugamrahp@ofni :liamENeed Help: Ask Question


5 comments: Post Yours! Read Comment Policy ▼

  1. If any SOP drop from SOP master list then what will be the SOP number? Can any New SOP replace the previous SOP?

    ReplyDelete
    Replies
    1. No, that number will never be given to any other sop.

      Delete
    2. Thank you Sir

      Delete
  2. Anonymous15 January

    If SOP revised but no change in annexure then what will be the annexure version no.

    ReplyDelete

Please don't spam. Comments having links would not be published.


Popular Categories

QA SOPs QC SOPs Micro SOPs HVAC Production SOPs Stores SOPs Checklists Maintenance SOPs HPLC Sterile GLP Validation Protocols Water System GDP Regulatory Maintenance Calibration Warning Letters Education B.Pharmacy
Online Courses


Follow Pharmaguideline


DOCUMENTS

PHARMACEUTICAL DOCUMENTS




Editable Pharmaceutical Documents in MS-Word Format. Ready to use SOPs, Protocols, Master Plans, Manuals and more...

View


adsbypg


Recent Posts