SOP for Cleaning of Polarimeter

1.0 OBJECTIVE

To clearly lay down the procedure for cleaning.

2.0 SCOPE

This procedure is applicable to Polarimeter installed in quality control laboratory.

3.0 RESPONSIBILITY

3.1 Doing: Technical Assistant
3.2 Checking: Executive/Manager

4.0 ACCOUNTABILITY

Head of the Department

5.0 PROCEDURE

5.1 After completion of the testing, remove the polarimeter tube from the instrument.
5.1 Switch off the instrument.
5.2 Switch off the mains.
5.3 Remove the solution /sample from the polarimeter tube.
5.4 Clean it with a respective solvent in which solution of the sample is prepared.
5.6 Clean it thoroughly with water.
5.7 Wipe it with tissue paper.
5.8 Wipe the temperature probe with tissue paper.
5.9 Clean the instrument with a cotton cloth
5.10 Record in the format of instrument log card.
Related: SOP for Calibration of Polarimeter

6.0 ABBREVIATIONS

6.1 SOP - Standard Operating Procedure

Get ready to use editable SOPs in MS-Word FormatView List

Share

Tweet

Share

Share