SOP for Cleaning of Conveyor Belt

1.0 OBJECTIVE:

To lay down the cleaning procedure for Conveyor Belt.

2.0 SCOPE:

This SCP shall be applicable to Conveyor Belt used in Packing area in Production department.

3.0 RESPONSIBILITY:

3.1 Execution: Operator
3.2 Checking: Pharmacist and Above

4.0 ACCOUNTABILITY:

HOD-Production

5.0 PROCEDURE:

5.1 Switch “OFF” the electrical supply of belt.
5.2 Remove all the strips/blisters lying or entrapped on the belt. Check for any product residue like broken tablets etc.
5.3 Remove all the dust from belt and table by dry clean lint free cloth.
5.4 Clean with a wet lint-free cloth and Wipe out with 70% v/v solution of Isopropyl Alcohol (IPA). Allow drying.
5.5 Affix “Cleaned” label.
5.6 Re-cleaned if not used within 72 hours.

6.0 ABBREVIATIONS:

SCP: Standard Cleaning Procedure
IPA: Isopropyl Alcohol

Get ready to use editable documents in MS-Word FormatView List

Share

Tweet

Share

Share