Get the latest updates from us for free
Mobile Apps



Procedure for Line Clearance Before Commencing any Manufacturing Operation


Learn the line clearance procedure for different departments before starting the operation.

1.0 Line clearance prior to dispensing

1.1 Check the dispensing area for the following:
1.2 All materials from previous operations have been removed.
1.3 Equipment and accessories from previous operations have been removed.
1.4 Paperwork from previous operations has been removed.
1.5 Status labels form previous operations have been removed.
1.6 The reverse laminar flow booths and surrounding are clean and status is displayed.
1.7 All the equipment and accessories required for dispensing are clean and labelled as such.

2.0 Line clearance prior to sifting / granulation / blending / compression / capsule Filling/ tablet inspection/ tablet coating / capsule Inspection and polishing

2.1 Check the areas for the following:
2.2 All materials and residues from previous operations have been removed.
2.3 Utensils and accessories from previous operations have been removed.
2.4 Containers used for previous operations have been removed.
2.5 Paperwork from previous operations has been removed.
2.6 Status labels form previous operations have been removed.
2.7 All equipment is clean and labeled as such.
2.8 Areas are clean and status is displayed.

3.0 Line clearance prior to overprinting

3.1 Check the area for the following:
3.2 All materials from previous operations have been removed.
3.3 All stereos from previous operations have been removed.
3.4 Paperwork from previous operations has been removed.

4.0 Line clearance prior to primary and secondary packaging

4.1 Check the area for the following:
4.2 All materials and residues from previous operations have been removed.
4.3 Containers used for previous operations have been removed
4.4 Paperwork from previous operations has been removed.
4.5 Status labels form previous operations have been removed.
4.6 All stereos from previous operations have been removed.
4.7 All equipment is clean and labeled as such.
4.8 Areas are clean and status is displayed.



Ads by Yahoo!

Write Your Valuable Comment Below ...

Adrian Garcia said...

do you have a form for line clearance?

Post a Comment