SOP for Dispensing and Issuance of Raw Material : Pharmaguideline

Online GMP Courses with Certificate

ENROLL

SOP for Dispensing and Issuance of Raw Material

Standard operating procedure of dispensing and issue the raw material used in manufacturing.

1.0 OBJECTIVE

To lay down a procedure for Dispensing & Issuing of Raw Material.

2.0 SCOPE

This SOP shall be applicable for all Raw Materials which are dispensed for Production at Stores Department.

3.0 RESPONSIBILITY

Stores Assistant/Officer

4.0 ACCOUNTABILITY

Head of Stores

5.0 PROCEDURE

5.1 Production department shall give Bill of Material / Material Requisition Sheet as per Batch Manufacturing Record well in advance to stores department.
5.2 After getting Bill of Material/Material Requisition Sheet from production dept., store person shall check the availability of approved material as per FEFO/FAFO system for the respective batch in SAP.
5.3 If any material found is still lying in under test, the store person shall inform to Q.C. immediately.
5.4 Store person shall transfer all the approved material as per FEFO/FAFO system at raw material dispensing area.
5.5 Before entering in dispensing area, all person shall follow Secondary Gowning procedure.
5.6 Store person shall check and verify all the detail, Material name and code, approved label, A.R. number, Batch No., Mfg. Exp. Date and Retest date (Use before date) before dispensing.
5.7 Store person shall put ‘ON’ the RLAF Dispensing Booth-I & II for 15 minutes before starting the dispensing activity.
5.8 Single product will be dispensed in dispensing area by using both dispensing booth.
5.9 Store person shall check the dispensing area for its cleanliness, as per SOP for Cleaning of Dispensing Room.
5.10 Store person shall check the pressure difference on pressure gauge it should be
  • Pressure gauge for Pre-filter: 1 to 6 mm of water gauge.
  • Pressure gauge for Intermediate-Filter: 3 to 6 mm of the gauge.
  • Pressure gauge for HEPA filter: 8 to 16 mm of water gauge.
5.11 Store person shall check the temperature & relative humidity in raw material dispensing room before starting dispensing.
5.12 Before starting the dFispensing activity, store person shall ensure that every equipment like containers, scoops are cleaned & dried to avoid cross contamination and also ensure that all the balances are calibrated before weighing.
5.13 After getting line clearance from QA person, start the dispensing activity in presence of Production person and Store person and fill the Dispensing Log Book.
5.14 Production person shall check the temperature and relative humidity and verify once again all the detail on the container, Material name and code, approval label, A.R. number, Batch No., Mfg. & Exp. Date and Retest date (Use before date) in dispensing room before weighing the material.
5.15 If any discrepancy is found, it should bring to the notice of the HOD QA & QC and necessary action is to be taken as per the instructions.

5.16 Store person shall use separate scoops for each material to avoid cross contamination.
5.17 While dispensing, if any material is found for spillage / breakage /leakage inform QA department and to superiors immediately.
5.18 Store person shall weigh the material under RLAF cabinet and shall open the container under RLAF in the safe working zone.
5.19 Store person shall weigh one material at a time in double polybags by scoops on balance. Sequence of material issues should be (1) Excipients & Colours & Flavour (2) Active material (3) Colours & Flavour.
5.20 Store person shall weigh the material as mentioned in Bill of material/ Requisition sheet and shall check the Potency of Material if applicable.
5.21 After weighing of material, store person shall mention Gross weight, Tare weight and Net weight and tie the weighed material with Weighing Slip and sign it. Production person shall verify the weight by signing the Weighing Slip.
5.22 Put the UNDER USE (LOOSE QTY.) label on the last used container and mention the quantity leftover on that container, transfer it to the respective approved storage area.
5.23 All issued material is transferred to Day Store (Dispensed Material Storage Area) through pass box along with Original and Duplicate Bill of Material. The packing person shall return the duplicate copy as receipt of material after signing the same to stores dept. for necessary entries.
5.24 After completion of dispensing, store person will put off the RLAF and clean the dispensing room as per SOP for Cleaning of Dispensing Room and clean the utensils as per SOP for Cleaning of Dispensing Utensils.
5.25 AR wise reconciliation shall be done by store person after consumption of respective AR No. and necessary entries shall be done in SAP.
5.26 Store person shall make necessary entry in the bill of material and also deduct the quantity in SAP system through (MB1A) movement.
5.27 Store person shall deface empty container/bags and will transfer to scrap yard for further disposal.

6.0 ABBREVIATION

6.1 SOP - Standard Operating Procedure
Get ready to use editable documents in MS-Word FormatView List





Ankur Choudhary is India's first professional pharmaceutical blogger, author and founder of pharmaguideline.com, a widely-read pharmaceutical blog since 2008. Sign-up for the free email updates for your daily dose of pharmaceutical tips.
.moc.enilediugamrahp@ofni :liamENeed Help: Ask Question


30 comments: Post Yours! Read Comment Policy ▼

  1. Thank you
    would like to know the sources that you've used to write it?

    ReplyDelete
  2. Dear sir,
    How to clean the despensing area.

    ReplyDelete
  3. Replies
    1. AR number is Analytical Report Number.

      Delete
  4. how to deal with light sensitive raw materials at the time of dispensing

    ReplyDelete
  5. dispense the light senstitive raw material in under the monochromatic light(yellow light).

    ReplyDelete
  6. IN WHICH CLASS OF ISO CLEENROOM THE DISPENSING BOOT SHOULD COME?

    ReplyDelete
  7. Sir protein hydrolysate how it's made?

    ReplyDelete
  8. Why required rlaf is started 15 min before dispensing?

    ReplyDelete
  9. sir should we off the RLAF at the time of dispensing material as colours & flavours, fragrance(liquid)

    ReplyDelete
  10. Rh of primary packing material

    ReplyDelete
  11. In color & flavor dispanse time,color dispance fast flavor dispanse last.why ???

    ReplyDelete
  12. If any active material is more than 5 ,which material weight first?
    Same for execipients which one is weight first?

    ReplyDelete
  13. is there any colour code for raw material loose containers

    ReplyDelete
  14. Use lux meter and keep light as per requirement.
    Dispense material in black polybag

    ReplyDelete
  15. If a sample failed the testing, retesting is required to confirm. Should we use a different sample or same sample but different QC analyst to perform the test?

    Thank you.

    ReplyDelete

Please don't spam. Comments having links would not be published.


Popular Categories

QA SOPs QC SOPs Micro SOPs HVAC Production SOPs Stores SOPs Checklists Maintenance SOPs HPLC Sterile GLP Validation Protocols Water System GDP Regulatory Maintenance Calibration Warning Letters Education B.Pharmacy
Online Courses


Follow Pharmaguideline


DOCUMENTS

PHARMACEUTICAL DOCUMENTS




Editable Pharmaceutical Documents in MS-Word Format. Ready to use SOPs, Protocols, Master Plans, Manuals and more...

View


adsbypg


Recent Posts